Volvo FH/FM Rear Drive Axle Housing 22324044 23568461 20836831 20836838 Euro 6

Description:
This listing is for a used genuine Volvo rear drive axle housing assembly suitable for late Volvo FH and FM heavy trucks. The axle is identified on the beam with the hand written part number 22324044 and the cast housing code 1048396 D25, corresponding to Volvo EV91 / RSS1344C style rear axle housings used on FH13, FM and FMX Euro 6 models. Online catalogues and dealer listings describe this unit as a rear axle case / housing with OEM numbers 22324044, 23568461, 20836831 and 20836838, fitted to 4x2 and 6x2/6x4 tractors and rigids.

The assembly offered here includes the main axle housing with differential carrier opening, hub and wheel mounting flanges, brake discs and calipers, suspension and torque arm brackets exactly as shown in the photos. It was removed from a fully operational vehicle and checked for basic function before dismantling by an HGV specialist workshop. The housing shows no visible cracks or weld repairs, mounting points are intact and the beam is straight. Surface rust is present on discs and exposed metal, and there are areas of worn paint and oil staining typical for a used commercial vehicle axle. Seals, bearings and brake components are considered consumables and should be inspected and renewed as necessary during installation.

This axle housing is designed for use on Euro 6 Volvo FH13, FM and FMX trucks equipped with RSS1344C / EV91 rear axles. It is suitable as a direct replacement for damaged or corroded housings, or as a rebuildable core for differential specialists. Always confirm part numbers and axle type against your existing unit (22324044 / 23568461 / 20836831 / 20836838 and casting 1048396 D25) and check compatibility by VIN with your Volvo dealer or workshop before ordering.

Professional installation is strongly recommended. The axle will normally require transfer of your existing differential centre, half‑shafts, air and brake lines, ABS sensors and any other model‑specific fittings, along with correct torque settings and wheel alignment. After fitting, the axle oil must be filled to the specified level and the braking system bled and checked in accordance with Volvo workshop procedures.

All our commercial vehicle parts are removed and tested prior to stripping. This axle was checked on the vehicle for noise and operation before removal and then drained of oil for shipping. We offer a 3‑month warranty on the housing against structural failure and a 30‑day return period subject to our terms.

Shipping & Returns:
We ship across UK/EU with tracked pallet services. Returns accepted within 30 days; buyer pays return postage. Please inspect upon arrival and message us with any concerns.

Why Buy From Us:
Genuine part, 3-month warranty, fast dispatch, secure packaging.