Used Truck Bonnet Ornaments, Bonnet Hinges & Latches

Used truck Bonnet Ornaments, bonnet hinges and latch parts

Bonnet Ornaments sits within the exterior, body and frame area of the truck, covering visible and functional parts fitted around the bonnet, front panel, grille and hood assembly. On modern HGVs these components are not only cosmetic. They help the front panel open and close correctly, keep the bonnet or grille securely located, support access for service work and protect surrounding bodywork from movement, vibration and misalignment. A worn hinge, broken bonnet lock or damaged front panel fitting can make routine maintenance harder, create rattles at the front of the cab, or prevent the panel from closing safely.

At VRA Truckparts this Bonnet Ornaments category is used for genuine used OEM truck parts removed from donor commercial vehicles. Current examples may include MAN TGX TG3 front panel hinges, radiator grille holder parts and centre bonnet lock assemblies for MAN TGX/TGS Euro 6 models. Listings can include OEM references such as 81611456011, 81.61145-6011, 81611456010, 81.6145-6010 and 81.97122-0042 / 81971220042 where they are visible or supplied with the part. Stock changes as trucks are dismantled, so always check the individual product listing, photographs, side, part number and donor vehicle details before ordering.

What you will find in the Bonnet Ornaments category

The Bonnet Ornaments category may contain a mixture of bonnet-related exterior fittings, front panel hardware and latch components. Because these are used OEM parts, availability depends on the trucks currently being dismantled and the condition of the removed assemblies. Items may be listed individually or with related fittings where shown in the product photos.

• Bonnet and front panel hinges for lifting, tilting or supporting the truck front panel.
• Left-hand and right-hand hinge assemblies, such as MAN TGX TG3 LH and RH front panel hinges.
• Radiator grille holder components connected with the bonnet or front panel mounting system.
• Centre bonnet lock assemblies and hood latch mechanisms for securing the panel closed.
• Spring-loaded latch parts, brackets and mounting hardware where included in the listing.
• Used OEM references including MAN numbers such as 81611456011, 81611456010 and 81971220042 when available.
• Related exterior body and frame fittings that sit around the bonnet, grille and front panel area.

Truck brands & typical applications

The clearest current applications in this Bonnet Ornaments category are MAN TGX, MAN TGX TG3 and MAN TGX/TGS Euro 6 vehicles. These parts are often generation-specific because the front panel shape, hinge castings, latch position and mounting points can change between cab versions and model updates. A MAN TGX TG3 left-hand hinge is not automatically interchangeable with a right-hand hinge or with a similar-looking part from another MAN generation. For other truck brands or models, related items may appear depending on dismantled stock, but compatibility should always be confirmed from the product listing rather than assumed from the category name alone.

Why Bonnet Ornaments matters

Bonnet Ornaments and related bonnet hardware are important for safe access, panel alignment and everyday workshop use. The bonnet or front service panel is opened repeatedly for inspection, repairs, cooling system access, lighting work and front-end body repairs. If the hinge geometry is worn or bent, the panel may sit unevenly, rub against adjacent trim, stress the grille, or become difficult to open and close. If the centre bonnet lock or hood latch does not engage properly, the panel may not be secured as intended. Correct used OEM parts help retain the original fitting position, bracket layout and strength specified for the vehicle.

For operators, a small bonnet component can have a large impact on uptime. A damaged hinge or latch may stop a truck returning to service after accident repair, front panel replacement, grille work or cab refurbishment. Replacing the failed part with the correct used OEM component can be a practical option when the original part number, side and mounting layout are matched carefully.

Typical reasons to replace bonnet hinges, locks and Bonnet Ornaments

• Impact damage to the front panel, bonnet, grille or cab corner after an accident or yard knock.
• Worn hinge pins, distorted castings or stiff hinge movement causing poor bonnet operation.
• Broken mounting points, cracked brackets or missing fastener locations on the original part.
• Corrosion around hinge bodies, latch housings or exposed mounting hardware.
• Bonnet or front panel sitting unevenly, rattling, rubbing or not lining up with surrounding trim.
• Centre bonnet lock failing to hold securely, release correctly or return under spring tension.
• Incorrect previous repair using a non-matching hinge, latch or aftermarket bracket.

How to choose the correct Bonnet Ornaments

Bonnet Ornaments and bonnet hardware should be chosen by exact identification, not only by appearance. Even when two parts look similar, the side, casting shape, pin angle or bolt spacing may be different. Before ordering, compare the listing with the part removed from your vehicle and use the available OEM references wherever possible.

• Check the truck make, model and generation, for example MAN TGX, TGX TG3 or TGS.
• Confirm the Euro/emission standard where relevant, such as Euro 6 for many current MAN listings.
• Match the OEM number or casting reference, such as 81611456011, 81.61145-6011, 81611456010 or 81.97122-0042.
• Check whether the part is left-hand or right-hand, especially for front panel hinges.
• Compare bolt holes, bracket shape, hinge arm length and mounting face angle.
• Look for included latch springs, pins, brackets and fixings shown in the listing photos.
• Compare the visible condition of the used part with your repair requirements.
• Use donor vehicle details, product photos and part numbers together rather than relying on one detail only.

If you are unsure whether a Bonnet Ornaments listing will match your vehicle, use our guide on how to find the right truck part or read about compatibility and VIN checks. Sending the VIN, registration, old part number and clear photos of the removed component can help reduce the risk of ordering the wrong bonnet hinge, latch or front panel fitting.

Used OEM parts from dismantled trucks

VRA Truckparts specialises in used genuine OEM truck parts removed from dismantled commercial vehicles. Bonnet Ornaments, hinges and latch assemblies are removed from donor trucks, visually checked, photographed and listed with available references where possible. Individual listings may state whether a component was checked on the vehicle before dismantling, but buyers should rely on the condition notes and photos for each specific item.

Used OEM bonnet hardware is particularly useful because these parts are shaped to the original cab and front panel structure. Correct hinge movement, latch alignment and mounting position are essential. A genuine used part with the right OEM number can often be a better match than a visually similar component from the wrong model year or side. You can learn more about our dismantling and quality process and the way parts are handled before being offered for resale.

Related exterior, body and frame buying guidance

Bonnet Ornaments often form part of a wider front-end repair. When a truck has suffered impact damage or a service panel has failed, workshops may also need to inspect the grille, headlamp brackets, front panel, bumper mountings, cab trim and surrounding exterior body fittings. Availability of related parts depends on current dismantling stock, so it is worth searching by the OEM number, model and component name if you cannot see the exact item immediately.

For trade buyers, the important point is to treat the bonnet hinge or latch as part of an assembly. A replacement hinge may not solve the issue if the front panel itself is bent, the mounting plate is distorted or the latch striker is out of alignment. Compare both sides of the vehicle where possible and check whether your existing fixings can be reused or whether the listing includes the hardware shown.

Delivery, payment and returns

Each Bonnet Ornaments product page provides the key information available for that used OEM part, including photographs, part references and condition notes. Before purchasing, check that the item shown is the correct side, type and specification for your truck. For order information, see delivery and shipping, payment and VAT information and returns and refunds. Condition guidance for used parts is also available on warranty and part condition.