Mercedes Actros MP4 Cabin Support Bracket A9603101260 A9603100373 LH Euro 6 Used

Description:
Genuine Mercedes-Benz left-hand front cabin support bracket for Actros MP4, Antos and Arocs Euro 6 trucks. This heavy-duty steel bracket forms part of the cab suspension / cab mounting system and supports the front corner of the driver’s cab on the chassis. It works together with the cabin suspension elements to ensure correct cab position, stability and ride comfort.

The casting on the part reads "A 960 310 12 60/0111", which cross‑references to official Mercedes-Benz catalogue number A9603101260 (also written as A 960 310 12 60 or 9603101260). Multiple commercial truck parts platforms list this number as a cabin suspension / cabin support component for Mercedes Actros MP4 tractors and rigid trucks, as well as related Antos and Arocs models from approximately 2012 onwards, Euro 6.([autoline.de](https://autoline.de/-/Verkauf/sonstige-Ersatzteile-Fahrerhaus/Sattelzugmaschine--22052014582255769000?utm_source=openai))

This bracket is a used OE part removed from a running Euro 6 vehicle. Before dismantling, the cab mounting was visually checked on the truck to make sure there were no obvious cracks, distortions or excessive movement. After removal, the bracket was cleaned, inspected and repainted in black anti‑corrosion coating. Mounting faces and bolt holes are in good condition with only minor cosmetic marks from previous fitting. No welding, repairs or structural defects were found.

Typical applications:
- Mercedes-Benz Actros MP4 tractor units and rigids (approx. 2012–2020, Euro 6)
- Mercedes-Benz Antos and Arocs models using the same front cab mounting design
- Left-hand (driver’s side on LHD trucks) front cab support bracket position

Please compare the part number A9603101260 / A 960 310 12 60 and the bracket shape, mounting points and orientation with your original part before ordering. If you are unsure about compatibility with your specific VIN or chassis, consult your Mercedes-Benz dealer or parts catalogue.

Installation notes:
- Professional installation is strongly recommended due to the safety-critical nature of cab mounting components.
- Bracket should be fitted using new OEM bolts and fasteners tightened to the manufacturer’s torque specifications.
- After installation, cab alignment and cabin suspension elements should be checked and, if required, adjusted according to Mercedes-Benz workshop procedures.
- No programming or electronic calibration is required, but a post-installation road test is advised.

Condition and warranty:
This is a used, refurbished OE bracket in Grade B condition – fully functional with normal cosmetic wear, cleaned and repainted. The part was checked on the vehicle before dismantling and inspected again after removal. Supplied as shown in the photos, without additional hardware or rubber mounts. We offer a 3‑month warranty against mechanical defects and a 30‑day return period, subject to standard terms.

Shipping & Returns:
We ship across UK/EU with tracked services. Returns accepted within 30 days; buyer pays return postage. Please inspect upon arrival and message us with any concerns.

Why Buy From Us:
Genuine part, 3-month warranty, fast dispatch, secure packaging.