Mercedes Actros MP4 Air Filter Hose Manifold A9604200440 Euro 6 Used

Description:
This listing is for a used genuine Mercedes-Benz air filter hose manifold / air line distributor for Actros MP4 Euro 6 trucks, OE part number A9604200440. The assembly consists of a central moulded plastic block with multiple ports and three attached rubber hoses with connectors. It is used in the engine bay to route air between the air filter housing and related intake or ventilation connections on Actros MP4 and closely related Antos/Arocs platforms.

According to independent truck parts catalogues, A9604200440 is specified for Mercedes-Benz Actros MP4 Euro 6 vehicles and is sometimes described as an air distributor or air filter hose for the intake system. Listings from European commercial vehicle breakers confirm application to Actros MP4 trucks in the 2011–on Euro 6 range. The Polish description "Przewód Filtra Powietrza Mercedes Actros MP 4 A9604200440" directly translates to "air filter hose" for Actros MP4, which matches the form and function visible in the photos.

The photographed part shows the moulded number A960 420 04 40 on the plastic body, confirming it is the correct OE component. The design features four mounting/connection bosses on the block and three flexible hoses of different lengths, allowing easy routing within the confined space of the Actros engine bay. This manifold is non‑electrical and has no moving parts, reducing the risk of internal failure; typical issues on used trucks are physical damage or cracking from vibration or incorrect handling rather than internal wear.

Compatibility should cover Mercedes-Benz Actros MP4 Euro 6 tractors and rigids across the OM93x and OM47x engine range. It may also be used on related Antos and Arocs models sharing the same intake layout; however, buyers should always confirm fitment by matching the OE part number A9604200440 with their existing component or by consulting a Mercedes-Benz EPC using the vehicle VIN.

Before dismantling, the donor vehicle was fully operational and the intake/air filter system was checked for leaks and error codes. This manifold showed no signs of air loss or damage. After removal, the part received a visual inspection and light cleaning only; it has not been pressure‑tested but is sold as a good working used component with a 3‑month warranty for peace of mind.

Installation is straightforward for a qualified commercial vehicle technician. In most cases no coding or special calibration is required: simply route the hoses as per the original, check that all clamps and seals are correctly seated and ensure there are no kinks or twists. After installation, it is recommended to run the engine, perform a leak check and monitor for any intake‑related fault codes.

Shipping & Returns:
We ship across UK/EU with tracked services. Returns accepted within 30 days; buyer pays return postage. Please inspect upon arrival and message us with any concerns.

Why Buy From Us:
Genuine part, 3-month warranty, fast dispatch, secure packaging.