Mercedes Actros/Axor Triangular Torque Rod A9423501205 Rear Suspension Euro 6

Description:
Genuine Mercedes-Benz rear suspension triangular torque rod / reaction rod for heavy commercial vehicles. This V-shaped arm controls axle location and torque reaction between the rear axle and chassis, helping to maintain correct axle alignment and handling under load and braking.

The OEM number on the part is MERCEDES-BENZ A 942 350 12 05 (A9423501205). Cross-referenced in commercial parts catalogues with 9423501205, 9423500505, 9423500805 and A9603500105, and aftermarket listings such as Gumet 11.35.01509. This type of triangular torque rod is widely used on Mercedes Actros MP4, Antos and Arocs tractors and rigids, as well as certain Axor and earlier Actros models, typically on Euro 5 and Euro 6 rear suspension layouts.

This used arm was removed from a complete working truck and was tested on the vehicle prior to dismantling. The bushes still have acceptable stiffness for further service life; there is no known play in the joints. Visual inspection shows only cosmetic corrosion and paint wear with no cracks or deformation to the forging.

Key features and specifications:
- Brand: Mercedes-Benz (OE)
- Part numbers: A9423501205 / A 942 350 12 05
- Cross numbers: 9423500505, 9423500805, A9603500105, Gumet 11.35.01509
- Type: rear suspension triangular torque rod / reaction rod
- Application: rear axle torque control and location
- Construction: steel V-shaped arms with bonded rubber bushes
- Approximate length: around 622 mm centre to centre (typical for this PN)
- Country of manufacture: Germany (Mercedes-Benz OE)
- Condition grade: B – used, tested on vehicle, bushes with normal wear

Compatibility:
Commonly fitted to Mercedes Actros MP4 (2012-on), Antos and Arocs models with air suspension, and compatible Axor/Actros variants where A9423501205 or its supersessions are specified in the parts catalogue. Always match the OEM number A9423501205 (or listed equivalents) and check with your Mercedes dealer or workshop using the VIN before purchase.

Installation notes:
Professional installation is strongly recommended. Torque rod replacement normally requires lifting/supporting the chassis and axle, replacing mounting bolts and nuts, and tightening to the manufacturer’s specified torque values with the suspension at normal ride height. After installation, axle geometry and alignment should be checked.

All photos in this listing show the actual item you will receive. Please review them carefully to confirm condition and configuration before ordering. If you need further measurements or images, contact us and we will be happy to assist.

Shipping & Returns:
We ship across UK/EU with tracked services. Returns accepted within 30 days; buyer pays return postage. Please inspect upon arrival and message us with any concerns.

Why Buy From Us:
Genuine part, 3-month warranty, fast dispatch, secure packaging.