MAN TGX/TGA LH Cab Spoiler Bracket 81629105259 81629105199 81629105184 Rear

Description:
This listing is for a used genuine MAN left-hand rear cab spoiler bracket assembly for MAN TGX and TGA trucks, OE part number 81629105259 (also referenced as 81.62910-5259 and 81629105259/0E). It is the long steel support bar with welded brackets and spring-loaded mounting plates that carries the left side air deflector / cabin spoiler behind the cab on F99L/R40-41 chassis. According to MAN parts catalogues and specialist sites, this bracket is fitted to TGX and TGA models with lateral cab spoilers and air deflector kits on Euro 5 and Euro 6 vehicles.

The bracket is manufactured from heavy-duty steel with black painted finish and multiple mounting points for the spoiler panel, hinges and gas strut. It spans the rear of the cab and fixes to the chassis and cab structure, providing correct positioning and stiffness for the left-hand spoiler. This part is critical to maintain spoiler alignment and to prevent vibration or damage to the cab bodywork.

Our donor vehicle was fully running and the spoiler system opened and closed correctly before dismantling. The bracket was visually inspected off the vehicle to verify that all welds, tabs and fixing holes are intact. There is typical cosmetic wear for a used exterior mounting part: localised surface rust on the end plates and some paint loss, but no structural cracks or distortion. All features such as the spring-loaded hinge section and integrated supports correspond to the original MAN design shown in online parts diagrams.

Compatibility is confirmed for MAN TGX and TGA trucks with F99L/R40-41 cab variants equipped with left-hand side cabin spoilers and air deflector kits. It is commonly used together with spoiler trims 81629100145 / 81.62910-0145 and related brackets 81629105199 and 81629105258. If you are unsure about fitment, please compare your existing bracket and OE number 81629105259 with the photos and consult your MAN dealer using your VIN.

Professional installation is recommended, as correct alignment of the spoiler and adjustment of hinges and gas strut may be required. No programming or electronic calibration is needed, but we advise checking all fixing bolts and bushes and replacing any worn rubber stops at the same time.

The part comes with a 3-month warranty against mechanical defects and a 30-day return policy. Before dismantling, the bracket assembly was checked on the vehicle to ensure it operated correctly with the spoiler system. It has since been cleaned of loose dirt and securely packaged to protect the long bar and mounting points in transit.

Shipping & Returns:
We ship across UK/EU with tracked services. Returns accepted within 30 days; buyer pays return postage. Please inspect upon arrival and message us with any concerns.

Why Buy From Us:
Genuine part, 3-month warranty, fast dispatch, secure packaging.