MAN TGS/TGX Twin Electric Horn Bracket Set 81253400115 012223901 24V Euro 6

Description:
This listing is for a used genuine MAN twin electric horn assembly complete with original mounting bracket and short wiring tails. The horns are marked 01 2223 901 and rated 24V 510 Hz, designed for heavy commercial vehicles. The plastic snail‑type horn bodies are fixed to the MAN bracket carrying OE numbers 81.25340-0115 and 81253400115, identified in MAN parts catalogues as the holder for the sound signals. The bracket allows the pair of horns to be mounted at the front of the chassis or behind the bumper on MAN TGS/TGX trucks.

The set was removed from a running MAN TGS/TGX Euro 5/Euro 6 vehicle and tested on the truck prior to dismantling. After removal the horns were again powered on a 24V supply to confirm correct tone and performance. All markings visible in the photos match MAN documentation for bracket 81.25340-0115 / 81253400115, confirming authenticity and compatibility. The assembly is suitable as a direct replacement for damaged or corroded horn units on MAN TGS and TGX models; it may also fit some MAN bus or special‑application chassis using the same horn bracket, but buyers should always confirm fitment via part numbers.

Condition is used Grade B: there are signs of previous use, including surface dirt on the horn bodies and notable surface corrosion on the steel bracket and fixings, but no structural damage. The plastic housings are intact with no cracks and the electrical connectors are undamaged. Only the components shown in the photos are included – typically two horns, the shared bracket and short lengths of wiring – so any additional mounting bolts or harness sections required for installation should be sourced separately.

Technical details and key features:
- Genuine MAN OE horn bracket and horn set
- OE reference numbers: MAN 81.25340-0115, MAN 81253400115 (bracket)
- Horn manufacturer number: 01 2223 901 stamped on both units
- 24V operation suitable for heavy trucks and buses
- Approximate frequency 510 Hz (as moulded on housing)
- Twin horn configuration for louder, clearer warning signal
- Plastic horn bodies with steel mounting bracket
- Country of manufacture: Germany (marked on horn housings)
- Intended placement: front exterior, usually on chassis or behind bumper

Installation notes:
Direct bolt‑on replacement on compatible MAN TGS/TGX models using bracket 81.25340-0115 / 81253400115. No programming or coding is typically required; however, professional installation is recommended to ensure secure mounting, correct earthing and reliable electrical connections. Always disconnect vehicle power before working on the electrical system and verify polarity according to the truck wiring diagram.

This part includes a 3‑month warranty against mechanical or electrical failure under normal use. The item is security‑marked and photographed prior to dispatch. Please compare all part numbers and connector styles with your old unit to ensure compatibility, and contact us if you require additional photos or measurements.

Shipping & Returns:
We ship across UK/EU with tracked services. Returns accepted within 30 days; buyer pays return postage. Please inspect upon arrival and message us with any concerns.

Why Buy From Us:
Genuine part, 3-month warranty, fast dispatch, secure packaging.