MAN TGS/TGX Cab Pillar Cover RH 81624100194 81624100196 81624100218 Euro 6

Description:
This listing is for a used genuine MAN right-hand cab pillar cover / windscreen pillar trim, OEM reference 81624100194 (short code 81.62410-0194). It is the long exterior plastic moulding that runs up the right-hand side of the cab windscreen pillar on MAN TGS and TGX models and selected TGL Euro 6 cabs. The panel finishes off the A‑pillar area, protects underlying structure and wiring from dirt and weather, and contributes to the aerodynamic and visual appearance of the cab.

According to MAN cross-references and aftermarket catalogues, this right cab pillar cover fits MAN TGS LX and TGX XLX/XXL Euro 6 ranges, as well as later MAN TGS/TGX and some TGL Euro 6 cabs where the pillar profile is the same. Typical application years are approximately 2013–2021 for TGX/TGS Euro 6 series; buyers should confirm fitment against their own chassis number or existing part number before purchase.

The part offered here is an original MAN component removed from a donor vehicle. Before dismantling, the cab trim was checked on the truck to ensure it sat correctly on the pillar and that all primary fixing points were secure. After removal, the cover was inspected again for cracks, distortion and broken lugs. Structurally it remains sound: the overall profile is straight and all key mounting areas are present, though some light edge wear and minor chips can be expected from previous use. The outer face shows typical commercial vehicle wear including surface scratches, stone marks and ingrained dirt; a full clean and, if required, repaint will significantly improve its appearance.

This is a bare trim panel supplied as pictured, with any remaining clips or fasteners treated as consumables that may require replacement during installation. No additional brackets, seals or screws are included unless shown in the photos. Installation is straightforward for a commercial vehicle bodyshop or competent fitter: remove the old damaged trim, transfer or replace clips and fastenings, align the new cover on the cab pillar and secure. No programming or electronic calibration is required as this is a purely mechanical exterior body component.

Genuine MAN parts such as this cab pillar cover provide correct fit and alignment with adjacent body panels compared with some pattern alternatives. Matching the original part number 81624100194 or the short format 81.62410-0194 will help ensure compatibility. The panel is white; depending on your cab colour, repainting or blending may be necessary for a perfect colour match.

Shipping & Returns:
We ship across UK/EU with tracked services. Returns accepted within 30 days; buyer pays return postage. Please inspect upon arrival and message us with any concerns.

Why Buy From Us:
Genuine part, 3-month warranty, fast dispatch, secure packaging.