Exterior, Body & FrameLight BarsBonnet OrnamentsBonnetsExterior Sun VisorsGrab HandlesBattery Supports & HousingsBumpersMud FlapsFramesHornsChassis, Bodies & BedsGrillsMoulding & TrimLocksWindscreen Wipers & WashersWing PanelsOther Exterior, Body & FramePanels, Fairings & DeflectorsMirrorsCab Doors & HardwareSleepers
MAN TGA/TGL/TGM/TGS/TGX Pressure Limiting Valve 81521016295 4750103330 Wabco
MAN TGA/TGL/TGM/TGS/TGX Pressure Limiting Valve 81521016295 4750103330 Wabco
Overview
Part Number: 81521016295
Description:
This listing is for a used genuine WABCO pressure limiting valve for MAN commercial vehicles. The OE plate on the unit clearly shows MAN 81.52101-6295 / 81521016295 and WABCO 475 010 333 0, confirming it as the correct pressure limiting valve used in the compressed air brake system. According to MAN/WABCO catalogues, this valve is fitted to MAN LE, TGL, TGM, TGA, TGS and TGX trucks as well as selected Neoplan buses across Euro 3, Euro 4, Euro 5 and early Euro 6 applications, where it regulates system pressure and protects downstream components.
The WABCO 4750103330 valve is designed for heavy-duty truck and bus air systems, with a maximum operating pressure of 20 bar and an outlet (delivered) pressure of approx. 9.3 bar at 12.5 bar inlet. It features a robust cast metal body with 2 x M22 x 1.5 threaded ports, two-bolt mounting (56 mm spacing) and a plastic dust cover. Typical installation is on the chassis or near the air compressor / reservoir within the service brake circuit.
This particular unit was removed from a running vehicle and tested on the truck prior to dismantling to confirm correct function, with no leakage or regulation issues observed at the time. After removal it received a basic clean and visual inspection. There is cosmetic corrosion and dirt on the housing from normal operation, but no structural damage. Threads and ports are in usable condition; however, we recommend fitting new sealing rings and checking all lines during installation. The valve is supplied as photographed, including the used air hoses still attached; brackets, bolts and additional fittings are not included.
Compatibility should be confirmed against your existing part number before purchase. If your vehicle currently uses MAN 81.52101-6295 / 81521016295, WABCO 475 010 333 0 or recognised equivalents such as Cojali 2223160 or Diesel Technic 372016, this valve will normally be a direct replacement for MAN LE, TGL, TGM, TGA, TGS and TGX trucks and related Neoplan buses. Always ensure the technical specification and pressure settings match your original unit.
Shipping & Returns:
We ship across UK/EU with tracked services. Returns accepted within 30 days; buyer pays return postage. Please inspect upon arrival and message us with any concerns.
Why Buy From Us:
Genuine part, 3-month warranty, fast dispatch, secure packaging.
This listing is for a used genuine WABCO pressure limiting valve for MAN commercial vehicles. The OE plate on the unit clearly shows MAN 81.52101-6295 / 81521016295 and WABCO 475 010 333 0, confirming it as the correct pressure limiting valve used in the compressed air brake system. According to MAN/WABCO catalogues, this valve is fitted to MAN LE, TGL, TGM, TGA, TGS and TGX trucks as well as selected Neoplan buses across Euro 3, Euro 4, Euro 5 and early Euro 6 applications, where it regulates system pressure and protects downstream components.
The WABCO 4750103330 valve is designed for heavy-duty truck and bus air systems, with a maximum operating pressure of 20 bar and an outlet (delivered) pressure of approx. 9.3 bar at 12.5 bar inlet. It features a robust cast metal body with 2 x M22 x 1.5 threaded ports, two-bolt mounting (56 mm spacing) and a plastic dust cover. Typical installation is on the chassis or near the air compressor / reservoir within the service brake circuit.
This particular unit was removed from a running vehicle and tested on the truck prior to dismantling to confirm correct function, with no leakage or regulation issues observed at the time. After removal it received a basic clean and visual inspection. There is cosmetic corrosion and dirt on the housing from normal operation, but no structural damage. Threads and ports are in usable condition; however, we recommend fitting new sealing rings and checking all lines during installation. The valve is supplied as photographed, including the used air hoses still attached; brackets, bolts and additional fittings are not included.
Compatibility should be confirmed against your existing part number before purchase. If your vehicle currently uses MAN 81.52101-6295 / 81521016295, WABCO 475 010 333 0 or recognised equivalents such as Cojali 2223160 or Diesel Technic 372016, this valve will normally be a direct replacement for MAN LE, TGL, TGM, TGA, TGS and TGX trucks and related Neoplan buses. Always ensure the technical specification and pressure settings match your original unit.
Shipping & Returns:
We ship across UK/EU with tracked services. Returns accepted within 30 days; buyer pays return postage. Please inspect upon arrival and message us with any concerns.
Why Buy From Us:
Genuine part, 3-month warranty, fast dispatch, secure packaging.
Features
Weight | 0 kg |
Condition | Used |
Warranty Period | 3 months |
Manufacturer Part Number | 4750103330 |
Grade | B – used, working, cosmetic corrosion |
Reference OE/OEM Number | MAN 81.52101-6295, MAN 81521016295, NEOPLAN 81521016295 |
Brand | WABCO |
Type | Pressure limiting valve, air brake system |
Intended Use | Replacement Part |
Country of Origin | Germany |
Location | United Kingdom |
Material | Cast metal body, plastic dust cover |
Placement on Vehicle | Chassis mounted, air brake system |
Model Compatibility | MAN LE, TGL, TGM, TGA, TGS, TGX, Neoplan buses |
Colour | Black housing, silver label |
Other Part Numbers | WABCO 475 010 333 0, Cojali 2223160, Diesel Technic 372016 |
Features | Air pressure limiting valve, 20 bar max, 9.3 bar outlet |
Dimensions | Approx 139 x 85 x 55 mm body size |
Included | Valve with plastic cover and attached hoses |
Temperature range | -40°C to +80°C |
Max operating pressure | 20.0 bar |
Mounting | 2 x Ø8.6 mm bolt holes, 56 mm spacing |
Port Threads | 2 x M22 x 1.5 ports |
Part Number | 81521016295 |
Other Part Numbers 1 | ProVia 502262, Febi 81521016295 |
EAN | 4057875222606 |
Delivered Pressure | 9.3 bar at p1 = 12.5 bar |
Upselling & Similar products
- 5%
On request
£18.99£19.99
In stock
SKUVRA-1569-856
- 5%
On request
£208.99£219.99
In stock
SKUVRA-1568-855
- 5%
On request
£218.49£229.99
In stock
SKUVRA-1567-854
- 5%
On request
£66.49£69.99
In stock
SKUVRA-789
- 5%
On request
£142.49£149.99
In stock
SKUVRA-732
- 5%
On request
£151.99£159.99
In stock
SKUVRA-693
- 5%
On request
£151.99£159.99
In stock
SKUVRA-525
- 5%
On request
£42.74£44.99
In stock
SKUVRA-475
- 5%
On request
£104.50£110
In stock
SKUVRA-316
- 5%
On request
£94.05£99
In stock
SKUVRA-299
Cross-selling
- 5%
On request
£189.99£199.99
In stock
SKUVRA-465
- 5%
On request
£104.50£110
In stock
SKUVRA-316
- 5%
On request
£94.05£99
In stock
SKUVRA-299
- 5%
On request
£52.25£55
In stock
SKUVRA-292
- 5%
On request
£147.25£155
In stock
SKUVRA-291
- 5%
On request
£65.55£69
In stock
SKUVRA-288
- 5%
On request
£52.25£55
In stock
SKUVRA-287
- 5%
On request
£52.25£55
In stock
SKUVRA-286
- 5%
On request
£265.05£279
In stock
SKUVRA-273
- 5%
On request
£56.05£59
In stock
SKUVRA-219
Reviews (0)
There are no reviews yet — yours may be the first.
Help other users with the choice - be the first to share your opinion about this product.