DAF XF106 CF85 Flywheel 1993504 CEI 196.537 DT 5.40309 MX-13 Euro 6 Used

Description:
This listing is for a used genuine DAF engine flywheel, OEM part number 1993504, as fitted to Euro 6 DAF CF and XF106 trucks with the MX-13 engine. The flywheel bolts to the crankshaft and provides the machined friction surface for the clutch cover as well as the starter ring gear used by the starter motor. Catalogues from CEI, DT and other manufacturers confirm 1993504 as the correct reference for rigid flywheels on DAF CF/XF Euro 6 applications, with equivalent aftermarket numbers CEI 196.537, 196537 and DT 5.40309.

The unit in the photos is a heavy single-mass steel flywheel with integral ring gear and multiple evenly spaced bolt holes around the centre to suit the MX-13 crankshaft and clutch cover. The original part number 1993504 is clearly stamped on the machined face. There are no visible cracks in the casting or broken teeth on the ring gear; only surface rust and normal discolouration are present from regular use. The clutch contact surface shows typical wear marks and light scoring but no deep grooves, so it may be used as-is or lightly skimmed depending on workshop preference.

According to current parts databases and commercial vehicle catalogues, this flywheel fits DAF CF Euro 6 and DAF XF106 tractor and rigid models from approximately 2013–2022 equipped with the MX-13 12.9L diesel engine in various power ratings (for example 430–510 hp). Always match the part number 1993504 and compare the design with your original flywheel before ordering.

The flywheel was tested on the truck before dismantling and confirmed to operate correctly without excessive vibration or abnormal rattling. After removal it received a visual inspection and basic cleaning; it has not been re-ground or rebuilt. The central pilot/bearing area should be checked and renewed if required during installation. No fixing bolts or clutch components are included – this sale is for the bare flywheel with ring gear only, exactly as shown in the images.

Professional installation is strongly recommended, with the clutch and starter system inspected at the same time. Follow DAF workshop procedures for torque settings and alignment. No special programming or electronic calibration is required after replacement, but correct torqueing and cleanliness of the crankshaft flange and clutch cover are essential for long service life.

All our used parts are removed from running commercial vehicles and are checked on the vehicle prior to dismantling wherever possible. Each item is visually inspected for cracks or obvious damage and cleaned for shipping. We offer a 3‑month warranty on this flywheel and a 30‑day return period, so you can purchase with confidence.

Shipping & Returns:
We ship across UK/EU with tracked services. Returns accepted within 30 days; buyer pays return postage. Please inspect upon arrival and message us with any concerns.

Why Buy From Us:
Genuine part, 3-month warranty, fast dispatch, secure packaging.