DAF XF106 AdBlue Pump Wiring Harness 2111173/00 87296 78044470A Euro 6

Description:
This listing is for a genuine DAF AdBlue / SCR pump wiring harness, part number 2111173/00 (also referenced as 2111173, 87296 and 78044470A). It is an original DAF cable loom used to connect the Euro 6 EAS/AdBlue pump assembly to the main chassis wiring on DAF heavy trucks. The harness features multiple sealed multi-pin connectors with yellow keying tabs and a protective corrugated outer sleeve, designed to withstand road dirt and moisture around the exhaust aftertreatment area.

The loom has been removed from a fully operational DAF Euro 6 vehicle and was checked for continuity and correct connector engagement before dismantling. Visual inspection confirmed that the insulation is intact and the plugs lock securely. It is suitable as a direct plug-and-play replacement for a damaged or corroded AdBlue pump loom.

Compatibility (to be confirmed by buyer):
– DAF XF106 Euro 6 tractors and rigids using the same AdBlue/SCR EAS pump assembly.
– May also fit related DAF CF Euro 6 models with identical pump and wiring configuration; please cross-check OE numbers 2111173/00, 2111173, 87296 and 78044470A with your existing loom or DAF parts catalogue before purchase.

Technical details and features:
– Brand: DAF genuine part.
– Type: AdBlue pump wiring harness / SCR EAS cable loom.
– OE numbers: 2111173/00, 2111173, 87296, 78044470A.
– Application: Euro 6 SCR/AdBlue exhaust aftertreatment system.
– Voltage: designed for 24V commercial vehicle electrical systems.
– Construction: copper conductors, plastic insulation, corrugated protective sleeve, sealed multi-pin connectors with yellow locking clips.
– Country of origin: Netherlands (DAF OEM production).
– Placement: exterior, chassis mounted area around AdBlue/SCR pump module.

Condition:
Used, grade B. The loom is complete and functional with normal in-service wear such as light dirt and minor abrasions on the conduit. Connectors and locks are intact with no broken pins observed. The part was tested on the vehicle prior to removal and again visually and electrically before listing. Supplied as shown, without additional pumps, brackets or sensors.

Installation notes:
Professional installation is recommended. Route the harness following the original clips and mounting points, keeping it clear of hot exhaust components and moving parts. Ensure all connectors are fully seated and locking tabs engaged, and check for any stored SCR/AdBlue fault codes after installation. No coding or programming is normally required when only the wiring loom is replaced, but system checks with a suitable diagnostic tool are advised.

Warranty & returns:
Genuine used OEM part with a 3-month warranty against electrical failure under normal use. We offer a 30-day return period; please make sure the part number and connectors match your old loom before ordering. Buyer is responsible for return postage where the wrong part is ordered.

Shipping & Returns:
We ship across UK/EU with tracked services. Returns accepted within 30 days; buyer pays return postage. Please inspect upon arrival and message us with any concerns.

Why Buy From Us:
Genuine part, 3-month warranty, fast dispatch, secure packaging.