Exterior, Body & FrameBonnet OrnamentsBonnetsExterior Sun VisorsGrab HandlesBattery Supports & HousingsBumpersMud FlapsFramesHornsChassis, Bodies & BedsGrillsMoulding & TrimLocksWindscreen Wipers & WashersWing PanelsOther Exterior, Body & FramePanels, Fairings & DeflectorsMirrorsCab Doors & HardwareSleepers
Mercedes Actros Arocs Antos Engine Mount A9602419213 182942 Front LH Euro 6 Used Motor Mounts
Mercedes Actros Arocs Antos Engine Mount A9602419213 182942 Front LH Euro 6 Used Motor Mounts Motor Mounts
Overview
Part Number: A9602419213
Description:
This listing is for a used genuine Mercedes-Benz engine mounting / silentbloc, part number A9602419213 (A960 241 92 13), fitted on modern Mercedes Actros MP4/MP5, Arocs and Antos Euro 6 trucks. The rubber–metal mount supports the engine at the front left side of the chassis, isolating vibration and absorbing driveline loads. It replaces OE references 9602419213 and cross-references Febi Bilstein 182942, DT 4.81583, Auger 81528, Sampa 204.311, SEM Lastik 16430, S-TR STR-1203580 and WG2316473.
The mount in the photos is the actual item for sale. Before dismantling, it was installed on a complete vehicle, where it was checked for correct operation with no abnormal engine movement or knocking noted. After removal, the rubber block and bonded interfaces were visually inspected; there are no visible cracks, splits or separation. The cast metal housing shows surface corrosion around the threaded inserts and general paint wear consistent with normal service, but no structural damage or modifications.
Typical applications include Mercedes-Benz Actros MP4/MP5 tractor units, rigids and construction chassis, as well as Arocs and Antos models with Euro 6 diesel engines, where this mount is used at the front left engine support. Always match the part number A9602419213 or the listed cross-numbers with your existing mount and confirm position (front left) and Euro 6 chassis before ordering.
No coding or programming is required after installation, but correct torque settings and alignment should be followed according to the Mercedes-Benz workshop manual. It is recommended to replace fixing bolts and nuts and to install mounts in pairs across the axle line for even support.
Shipping & Returns:
We ship across UK/EU with tracked services. Returns accepted within 30 days; buyer pays return postage. Please inspect upon arrival and message us with any concerns.
Why Buy From Us:
Genuine part, 3-month warranty, fast dispatch, secure packaging.
This listing is for a used genuine Mercedes-Benz engine mounting / silentbloc, part number A9602419213 (A960 241 92 13), fitted on modern Mercedes Actros MP4/MP5, Arocs and Antos Euro 6 trucks. The rubber–metal mount supports the engine at the front left side of the chassis, isolating vibration and absorbing driveline loads. It replaces OE references 9602419213 and cross-references Febi Bilstein 182942, DT 4.81583, Auger 81528, Sampa 204.311, SEM Lastik 16430, S-TR STR-1203580 and WG2316473.
The mount in the photos is the actual item for sale. Before dismantling, it was installed on a complete vehicle, where it was checked for correct operation with no abnormal engine movement or knocking noted. After removal, the rubber block and bonded interfaces were visually inspected; there are no visible cracks, splits or separation. The cast metal housing shows surface corrosion around the threaded inserts and general paint wear consistent with normal service, but no structural damage or modifications.
Typical applications include Mercedes-Benz Actros MP4/MP5 tractor units, rigids and construction chassis, as well as Arocs and Antos models with Euro 6 diesel engines, where this mount is used at the front left engine support. Always match the part number A9602419213 or the listed cross-numbers with your existing mount and confirm position (front left) and Euro 6 chassis before ordering.
No coding or programming is required after installation, but correct torque settings and alignment should be followed according to the Mercedes-Benz workshop manual. It is recommended to replace fixing bolts and nuts and to install mounts in pairs across the axle line for even support.
Shipping & Returns:
We ship across UK/EU with tracked services. Returns accepted within 30 days; buyer pays return postage. Please inspect upon arrival and message us with any concerns.
Why Buy From Us:
Genuine part, 3-month warranty, fast dispatch, secure packaging.
Features
Weight | 0 kg |
Condition | Used |
Warranty Period | 3 months |
Manufacturer Part Number | A9602419213, 9602419213, A960 241 92 13 |
Grade | B – used, moderate wear, fully functional |
Reference OE/OEM Number | Mercedes-Benz A960 241 92 13, 960 241 92 13 |
Brand | MERCEDES-BENZ |
Type | Engine mounting silentbloc rubber-metal front |
Intended Use | Replacement Part |
Country of Origin | Germany (Mercedes-Benz commercial vehicles) |
Location | United Kingdom |
Material | Cast steel housing with bonded rubber insert |
Placement on Vehicle | Front left (LH) engine support on chassis |
Model Compatibility | Mercedes Actros MP4/MP5, Arocs, Antos Euro 6 trucks |
Colour | Black / dark grey metal and rubber |
Other Part Numbers | Febi 182942, DT 4.81583, Auger 81528, Sampa 204.311 |
Features | Rubber-metal mount, front position, Euro 6 chassis |
Dimensions | Approx. 133 mm height, bolt spacing 150/100 mm |
Included | Engine mount block only, without bolts or nuts |
Part Number | A9602419213 |
Thread Size | M16x1.5 and M18x1.5 mounting threads |
Other Part Numbers 1 | SEM Lastik 16430, S-TR STR-1203580, WG2316473 |
EAN | 4057795609150 |
Reviews (0)
There are no reviews yet — yours may be the first.
Help other users with the choice - be the first to share your opinion about this product.