MAN TGX/TGS Window Lifter Motor Right 81286016138 81259706108 FEBI 179340 Window Winders & Regulators

Description:
This listing is for a genuine MAN/KÜSTER right-hand electric window lifter motor used on MAN TG-series heavy-duty trucks. The unit combines the DC motor and gear drive that powers the front door window regulator. According to MAN parts catalogues and aftermarket cross-references, OE numbers 81.28601-6138 and 81286016138 refer to the right-hand electric window motor for MAN TGL, TGM, TGS and TGX trucks from around 2005 up to the Euro 6 generation. Cross references include 81.25970-6108 and 81259706108 as well as aftermarket numbers FEBI 179340, AUGER 82235, DT 3.85074, PE 030.175-00A and TRUCKTEC 05.58.084.

The motor housing is beige plastic with integrated mounting points for the regulator and door, black electronic cover and a grey cylindrical 24V motor. A 6-pin rectangular connector provides the electrical interface with the door control module. This part is designed for commercial vehicles with 24-volt electrical systems and fits the right-hand front cab door. Typical applications include MAN TGL, TGM, TGS and TGX truck models built approximately between 2005 and 2021, including Euro 5 and Euro 6 variants. Always cross-check the OE number with your existing unit or VIN-based MAN EPC to confirm compatibility before purchase.

The item was removed from a fully operational donor truck where the electric window function was tested prior to dismantling. The motor runs smoothly, and the gear mechanism shows no visible damage. External condition is used but sound, with minor cosmetic marks and some discolouration of the plastic from normal service. All three mounting points are intact and the output shaft and spline are in good condition. The unit has been visually inspected and lightly cleaned and is supplied with three mounting screws as shown in the photos.

Installation should be carried out by a competent technician familiar with MAN cab doors. In most cases the motor can be swapped without programming, but basic window initialisation or calibration via the door switch may be required after installation so that the one-touch function and anti-pinch work correctly. Reuse your existing regulator frame and wiring harness unless damaged. This used genuine part offers a cost-effective alternative to a new OE motor while maintaining original fit and performance.

All our commercial vehicle parts are carefully checked and stored indoors. The motor is backed by a 3-month warranty against mechanical or electrical failure under normal use. Please verify the part numbers and connector configuration against your old unit before ordering.

Shipping & Returns:
We ship across UK/EU with tracked services. Returns accepted within 30 days; buyer pays return postage. Please inspect upon arrival and message us with any concerns.

Why Buy From Us:
Genuine part, 3-month warranty, fast dispatch, secure packaging.