MAN TGA/TGL/TGM/TGS/TGX LH Door Lock With Central Locking 81626806147 24V Euro 6 Cab Doors & Hardware

Description:
This listing is for a used genuine MAN left-hand cab door lock with central locking motor, part number 81.62680-6147 / 81626806147. The unit is a complete interior door latch assembly with 24V electric actuator, linkage rods and cables, designed for the driver’s front door on MAN TG-series trucks. The photos show the original MAN latch body with integrated plastic actuator module and wiring tail with two connectors.

The part is commonly fitted to MAN TGA, TGL, TGM, TGS and TGX models from approximately 2004 up to Euro 6 production. Cross-reference catalogues and aftermarket suppliers confirm that OE 81626806147 replaces or is interchangeable with 81626806149, 81626806143 and 81626806121, and that it is specified as the left front door lock / driver cab door lock for these platforms. Please compare the part number and photos with your existing lock to ensure compatibility.

Functionally this component combines the mechanical latch that secures the door to the cab frame with an internal 24V central locking actuator. The actuator receives signals from the vehicle’s central locking system to lock and unlock the door, while the linkage rods and cables connect to the interior and exterior handles and lock buttons. Correct operation of this assembly is essential for safe door retention and security of the cab.

The unit on offer was removed from a working MAN truck and was checked for proper operation before dismantling: the latch closes and releases correctly, the actuator cycles on lock and unlock, and the cables move smoothly. No broken mounting holes or obvious structural damage are present, only typical surface rust and road grime from normal service. Electrical connectors are complete and the insulation on the harness is intact.

Installation should be carried out by a competent technician. In most cases this part can be fitted as a direct replacement without programming, but it is recommended to check central locking operation and any fault codes with a suitable diagnostic tool after installation. Adjust the latch position and linkage rods according to the MAN workshop manual so that the door closes cleanly and seals properly.

This used MAN door lock comes as pictured, without additional fixings, striker plates or door trim components. Please reuse your existing bolts and hardware where suitable. All identifying marks and OE numbers, including 81.62680-6147 / 81626806147, are visible on the housing and confirm it is an original-spec component.

The part has been visually inspected and function-tested before removal to ensure it is serviceable. It has been lightly cleaned and will be securely packaged to prevent damage in transit.

Shipping & Returns:
We ship across UK/EU with tracked services. Returns accepted within 30 days; buyer pays return postage. Please inspect upon arrival and message us with any concerns.

Why Buy From Us:
Genuine part, 3-month warranty, fast dispatch, secure packaging.