Used Truck Exterior Mouldings & Trim Panels

Used truck exterior mouldings & trim panels for European HGVs

Exterior mouldings and trim panels on a heavy truck protect vulnerable areas of the cab and body and finish off the overall look of the vehicle. These plastic panels sit around the headlights and fog lamps, along the windscreen cowl, near the cab steps, toolbox doors and electrical housings, helping to shield paintwork, wiring and lamp units from everyday damage.

In this category we offer used OEM exterior mouldings, covers and trim panels removed from complete donor trucks. Typical examples include DAF XF106 headlamp covers, fog lamp frames and wiper cowl panels, Mercedes-Benz Actros MP4 entry mouldings and fog lamp covers, Volvo FH4 toolbox doors and MAN TGX sensor housing and electrical system covers.

What you will find in the Moulding & Trim category

Stock in the Moulding & Trim category changes as new donor vehicles arrive, but it typically includes:

• headlamp and fog lamp covers that sit around or below the headlight and fog lamp units in the bumper and front panel;
• windscreen wiper cowl panels and scuttle trims under the windscreen that guide water away from the cab and protect wiring;
• cab entry and step mouldings near the doors and steps, including tread panels and edge trims;
• toolbox doors and access panels along the chassis or side skirts;
• sensor and electrical housings and plastic covers for control units and wiring channels;
• other protective plastic trim panels around the cab and front end of the truck.

Each listing includes clear photos, OE/OEM part numbers where available and donor vehicle details so you can compare shape, mounting points and surface finish with the moulding or trim fitted to your own truck.

Truck brands & typical locations on the cab

Most exterior mouldings and trim panels in this category are taken from mainstream European heavy trucks, including:

• DAF XF and CF series, for example XF106 headlamp covers and wiper cowl panels;
• Mercedes-Benz Actros MP3 and MP4 cab entry mouldings and fog lamp covers;
• MAN TGS and TGX sensor housings and electrical system covers;
• Volvo FH and FM toolbox doors and protective trim panels;
• other brands such as Scania and Iveco when suitable donor trucks are available.

These parts are normally located at the very front of the cab, around the bumper and grille area, under the windscreen, along the doors and steps or on side-mounted toolboxes and equipment housings.

Why exterior mouldings & trim matter

Even though they are not structural, mouldings and trim panels are important for:

• Protection – shielding paintwork, headlamps, fog lamps, wiring looms and control units from stones, spray and minor impacts;
• Weather sealing – helping to keep water away from the windscreen base, electrical housings and sensitive components;
• Aerodynamics and noise – closing gaps and smoothing airflow around the cab, which can reduce wind noise and drag;
• Professional appearance – tidy, unbroken trim panels and mouldings keep the truck looking clean and presentable for customers and roadside inspections.

Typical reasons to replace a moulding or trim panel

Common reasons to order parts from this category include:

• cracked or broken panels after minor bumps, yard damage or contact with loading bay structures;
• missing covers that leave lamp units, wiring or control modules exposed;
• worn, faded or poorly repaired trim that lets the truck down visually compared to the rest of the cab;
• corroded fixings behind plastic panels where replacement mouldings are supplied complete with brackets;
• replacing non-original or universal parts with the correct OEM moulding for your truck brand and model.

How to choose the correct moulding or trim panel

To minimise fitting issues and ensure the right appearance, please check the following details before ordering:

• truck brand, model and generation – for example DAF XF106, Mercedes Actros MP4, MAN TGX Euro 6, Volvo FH4;
• cab type and height – day cab, sleeper cab, low-roof or high-roof versions can have different trim designs;
• exact location and side – front, rear, left-hand (LH) or right-hand (RH) side, bumper corner, step area, toolbox, windscreen cowl, etc.;
• openings and features – holes for fog lamps, sensors, badges or access hatches that must match your original part;
• surface finish and colour – painted, primed, textured black plastic or colour-coded trim;
• OEM part numbers stamped on your existing moulding or listed on the data label, matched against the references shown in the product description.

If you are unsure, you can contact us with your VIN or registration number and clear photos of the damaged or missing panel. Our team can help confirm compatibility before you place an order. For general guidance, see How to Find the Right Part and Compatibility & VIN Policy.

Used OEM mouldings & trim from dismantled trucks

VRA Truckparts specialises in used OEM truck parts sourced from carefully selected donor vehicles. Trucks are inspected and documented before dismantling so that cab and exterior components, including mouldings and trim panels, can be assessed. During dismantling, our technicians remove the panels, check mounting points and visible faces for damage, and reject units that do not meet our standards.

Usable parts are cleaned externally, labelled and stored under cover in our warehouse ready for dispatch. To learn more about how we work, please visit Our Dismantling & Quality Process, Warranty & Part Condition and Trucks We Dismantle.

Related exterior & lighting categories

If you are repairing the front end or cab exterior, you may also want to browse:

• Bumpers – front bumpers, bumper corners and impact-absorbing parts;
• Grills – front grilles and radiator grille panels around the cooling pack;
• Panels, Fairings & Deflectors – larger exterior panels and side fairings;
• Cab and Sleeper Windows and Mirrors – other key exterior visibility components;
• Fog Lights and Headlights – lamp units that are often surrounded by mouldings and trim from this category.

Delivery, payment & returns

Most mouldings and trim panels can be shipped as well-packed parcels or palletised items with tracked delivery across the UK and EU. For details of available services, transit times and costs, please see our Delivery & Shipping page.

Information about payment methods, VAT handling and returns is available on Payment & VAT and Returns & Refunds. If you need to combine exterior trim with bumpers, lights or other body panels for the same vehicle, our team will be happy to help you build a complete order.